Pe (Half Load Function Error - Only Dmt800) - Samsung DMT SERIES Service Manual

#7. Error Code

7-8. PE (Half Load Function Error - only DMT800)

Symptom
ㆍPE error is displayed.
Causes
ㆍPE error occurs when the half load motor does not spin after the cycle starts
Check Point
Step 1 : Half Load Motor
Check the connections at the Half Load motor connector.
Reconnect the Half Load motor connector.
Check for the resistance between both ends of the Motor.
The Resistance : approximately 3.9kΩ
If the value is not normal, replace the Half Load Motor.
Step 2 : Main PBA
If the half load motor is normal, replace the Main PBA assembly.
Half load motor, main PBA
0 5:269#0