Error Messages; Recycling Instruction - Scale House MB1 Operating Manual

8. ERROR MESSAGES

ERROR
DESCRIPTION
MESSAGES
0-ERR Over range
b-ERR Low battery
Err 4 Zero Setting
Error
Err 6 Input signal
greater than
3mV/V

RECYCLING INSTRUCTION

The crossed-out wheeled bin on the product means that at the product end of life, it
must be taken to separate collection or to the reseller when a new equivalent type of
equipment is purchased. The adequate differentiated refuse collection in having the
product recycled, helps to avoid possible negative effects on the environment and
health and supports the recycling of the materials of which the equipment is made.
The unlawful disposal of the product by the user will entail fines foreseen by the current regulations.
SOLUTION
Remove weight from the scale.
Change the batteries.
Upon start-up or when the ZERO key is pressed, the weight
on the scale exceeds the percentage programmed on the
max. capacity. Remove the excess weight and retry.
Indicates that the A/D converter value is greater than the
maximum value:
- Remove the weight from the scale if it's exceeding.
- The load cell or the electronics could be damaged.
13