Cleaning Drain Pump - Bosch Maxx 1000 Instruction Manual

Cleaning the drain
pump
90 °C
max.
Downloaded from www.Manualslib.com
This is necessary if the washing solution has not been
completely drained. The pump is blocked by either
loose debris or fluff which accumulates if fluff giving
fabrics are washed.
Draining the washing solution
i Up to 20 litres / 4.4 gal. Have a suitable container
d Risk of scalding!
Allow the hot washing solution to cool.
Keep children and pets away.
1. Turn the programme selector to Off.
2. Fold down the cover panel.
3. Unscrew the pump cap slightly until the washing
4. When the cover plate cavity is half full, tighten the
i Repeat the last two steps until all the washing
5. Carefully remove the pump cap.
6. Remove any loose debris / fluff from inside the
7. Attach and tighten the pump cap.
8. Attach and close the cover plate.
manuals search engine
ready.
solution slowly begins to run into the cover plate
cavity.
pump cap and empty the cover plate cavity.
solution has been drained.
pump and clean the pump. The pump impeller
must be able to rotate.
Clean any residual lye or fluff from the thread of the
pump cap and pump housing.
29