Bosch Maxx 1000 Instruction Manual page 47

Transport
Preparing and inserting
the transport bolts
Downloaded from www.Manualslib.com
Before transporting the washing machine (e.g. when
moving house).
1. Turn off the water tap.
2. Release the water pressure in the supply hose
3. Drain any residual washing solution (refer to
4. Disconnect the washing machine from the mains.
5. Detach the hoses.
6. Remove the covers.
7. Pull the bolt out of the sleeve until the end
8. Insert and tighten transport bolts. The lugs on the
i Having transported the appliance and ensured
manuals search engine
(refer to Page 30).
Page 29).
of the bolt is flush with the end of the sleeve.
washer must be located in the groove in the rear
panel of the housing.
proper installation, connection and having re
moved the transport bolts, allow the Drain pro
gramme to run through before starting the first
wash programme.
47