Minuteman MR1500 Series Parts And Instruction Manual page 10

8. Once the motor is at full speed, carefully lower the pad onto the floor.
B
A
Diagram 1
TO MANEUVER THE MACHINE
1. Raise the handle slightly and the machine will go to the right. The higher you raise it, the faster it will go.
2. Lower the handle and the machine will go left. The more you lower it, the faster it will go.
3. Practice on a smooth surface until you gain experience in operating the unit.
TO ADJUST THE HANDLE-LOCK MECHANISM:
1. Unlock the handle and place it in the upright position.
2. Tighten the adjusting nut until there is just a slight drag when the handle is raised or lowered. Do not
overtighten.
3. Place the handle grip into the down (locked) position to check for proper locking function.
Adjusting nut
Parts and Instruction Manual - MR1500/MR2000 Burnisher
B
Locking Mechanism
handle
Page 10