Utility Command Menu; Upgrade Main Software; Backup System Configuration; Restore System Configuration - Patton electronics RocketLink 3202 Getting Started Manual

Model 3202 Getting Started Guide

Utility Command Menu

Model 3202 has three utility tools embedded in the firmware: upgrade, backup and restore. You can update
the new firmware via TFTP upgrade tools, backup the configuration via the TFTP backup tool and restore the
configuration via the TFTP restore tool. To upgrade the firmware, you must have the new firmware file named
*.bin that will be supported by supplier. Also, you must have your own TFTP server. For backup and restore
operations, you must also have your own TFTP server to backup and restore the configuration files.
Move the cursor " >>" to utility in the main menu and press Enter. The following menu displays:
upgrade

Upgrade main software

>>
backup

Backup system configuration

restore

Restore system configuration

Upgrade main software

To upgrade the Model 3202 firmware, move the cursor " >>" to upgrade in the utility menu and press Enter.
Type the TFTP server IP address and name of the upgraded firmware file.
-----------------------------------------------------------------------------
Command: utility upgrade <ip> <file>
Message: Please input the following information.
TFTP server IP address (ENTER for default) <192.168.0.2>:
Upgrade filename (ENTER for default) <default.bin>:
-----------------------------------------------------------------------------

Backup system configuration

To backup the current system configuration, move the cursor " >>" to backup in the utility menu and press
Enter. Type the TFTP server IP address and name for the backup file.
-----------------------------------------------------------------------------
Command: utility backup <ip> <file>
Message: Please input the following information.
TFTP server IP address (ENTER for default) <192.168.0.2>:
Upgrade filename (ENTER for default) <default.bin>:
-----------------------------------------------------------------------------

Restore system configuration

To restore a saved configuration file, move the cursor " >>" to restore in the utility menu and press Enter. Type
the TFTP server IP address and name of the system configuration file you want to restore to the Model 3202.
-----------------------------------------------------------------------------
Command: utility restore <ip> <file>
Message: Please input the following information.
TFTP server IP address (ENTER for default) <192.168.0.2>:
Upgrade filename (ENTER for default) <default.bin>:
-----------------------------------------------------------------------------

Utility Command Menu

5 • Console and Telnet configuration
95