Table of Contents
Advertisement
Item
Name
Interface
Address Type
Start IP Address
End IP Address
Subnet Mask
Invert Selection
3.
After finishing all the settings here, please click OK to save the configuration. Below is
an example of IP objects settings.
78
Description
Type a name for this profile. Maximum 15 characters are
allowed.
Choose a proper interface.
For example, the Direction setting in Edit Filter Rule will
ask you specify IP or IP range for WAN or LAN or any IP
address. If you choose LAN/WAN/Any as the Interface here,
and choose AN/WAN/Any as the direction setting in Edit
Filter Rule, then all the IP addresses specified with
AN/WAN/Any interface will be opened for you to choose in
Edit Filter Rule page.
Determine the address type for the IP address.
Select Single Address if this object contains one IP address
only.
Select Range Address if this object contains several IPs
within a range.
Select Subnet Address if this object contains one subnet for
IP address.
Select Any Address if this object contains any IP address.
Select Mac Address if this object contains Mac address.
Type the start IP address for Single Address type.
Type the end IP address if the Range Address type is
selected.
Type the subnet mask if the Subnet Address type is selected.
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Vigor122 User's Guide
Advertisement
Table of Contents
