Table of Contents
Advertisement
PPPoE Pass-through
Vlan Tag Insertion
ISP Access Setup
IP Address From ISP
20
Multi-PVC channel - The selections displayed here are
determined by the page of Internet Access – Multi PVCs.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
Encapsulating Type - Drop down the list to choose the type
provided by ISP.
Protocol - Drop down the list to choose the protocol, PPPoE
or PPPoA.
Modulation – Choose a suitable method for PPPoE/PPoA
connection.
The modem offers PPPoE dial-up connection. Besides, you
also can establish the PPPoE connection directly from local
clients to your ISP via the Vigor modem. When PPPoA
protocol is selected, the PPPoE package transmitted by PC
will be transformed into PPPoA package and sent to WAN
server. Thus, the PC can access Internet through such
direction.
For Wired LAN – If you check this box, PCs on the same
network can use another set of PPPoE session (different with
the Host PC) to access into Internet. However, if this box is
checked in PPPoA protocol, only PPPoE clients on the LAN
will be served and only one session is allowed.
Check the box to enable the function of VLAN with tag.
The router will add specific VLAN number to all packets on
the WAN while sending them out.
Tag value – Type the value as the VLAN ID number. The range
is form 0 to 4095.
Enter your allocated username, password and authentication
parameters according to the information provided by your
ISP. If you want to connect to Internet all the time, you can
check Always On.
ISP Name – Type the name of the ISP if required.
Username – Type in the username provided by ISP in this
field.
The maximum length of the user name you can set is 63
characters.
Password – Type in the password provided by ISP in this field.
The maximum length of the password you can set is 62
characters.
PPP Authentication – Select PAP only or PAP or CHAP for
PPP.
Always On - If you want to connect to Internet all the time,
check the Always On box.
Idle Timeout – Set the timeout for breaking down the
Internet after passing through the time without any action.
Usually ISP dynamically assigns IP address to you each time
you connect to it and request. In some case, your ISP
provides service to always assign you the same IP address
whenever you request. In this case, you can fill in this IP
address in the Fixed IP field. Please contact your ISP before
you want to use this function.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use
WAN IP Alias. You can set up to 8 public IP addresses other
Vigor122 User's Guide
Advertisement
Table of Contents
