WAN link for Channel 3, 4 are provided for modem-borne application such as TR-069 and VoIP.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 3 or 4 to configure your modem.
Available settings are explained as follows:
Item
WAN for Router-borne
Application
DSL Modem Settings
After finished the above settings, click OK to save the settings and return to previous page.
26
Description
Management can be specified for general management (Web
configuration/telnet/TR069). If you choose Management,
the configuration for this VLAN will be effective for Web
configuration/telnet/TR069.
Set up the DSL parameters required by your ISP. These are
vital for building DSL connection to your ISP.
VPI - Type in the value provided by ISP.
VCI - Type in the value provided by ISP.
QoS Type - Drop down the list to choose the type provided by
ISP.
Protocol - Drop down the list to choose the one provided by
ISP.
Encapsulation - Drop down the list to choose the type
provided by ISP.
Vigor122 User's Guide