Table of Contents
Advertisement
MAC Address Setting
After finishing all the settings here, please click OK to activate them.
I
I
-
1
-
1
-
2
D
I
I
-
1
-
1
-
2
D
MPoA is a specification that enables ATM services to be integrated with existing LANs, which
use either Ethernet, token-ring or TCP/IP protocols. The goal of MPoA is to allow different
LANs to send packets to each other via an ATM backbone.
For static IP mode, you usually receive a fixed public IP address or a public subnet, namely
multiple public IP addresses from your DSL or Cable ISP service providers. In most cases, a
Cable service provider will offer a fixed public IP, while a DSL service provider will offer a
public subnet. If you have a public subnet, you could assign an IP address or many IP address
to the WAN interface.
To use MPoA as the accessing protocol of the Internet, select MPoA mode. The following web
page will appear.
Vigor122 User's Guide
than the current one you are using. Notice that this setting is
available for WAN1 only. Type the additional WAN IP address
and check the Enable box. Then click OK to exit the dialog.
Fixed IP – Click Yes to use this function and type in a fixed IP
address in the box of Fixed IP Address.
Default MAC Address – You can use Default MAC Address or
specify another MAC address by typing on the boxes of MAC
Address for the modem.
Specify a MAC Address – Type the MAC address for the
modem manually.
Index (1-15) in Schedule Setup - You can type in four sets of
time schedule for your request. All the schedules can be set
previously in Applications >> Schedule web page and you
can use the number that you have set in that web page.
e
t
a
i
l
s
P
a
g
e
f
o
r
M
P
o
e
t
a
i
l
s
P
a
g
e
f
o
r
M
P
o
A
A
21
Advertisement
Table of Contents
