Table of Contents
Advertisement
I
-
5
O
n
l
i
n
e
S
t
a
I
-
5
O
n
l
i
n
e
S
t
a
Such page displays the physical connection status such as LAN connection status, WAN
connection status, ADSL information, and so on.
Detailed explanation (for IPv4) is shown below:
Item
LAN Status
WAN1 Status
ADSL Information
Vigor122 User's Guide
t
u
s
t
u
s
Description
Primary DNS-Displays the primary DNS server address for
WAN interface.
Secondary DNS -Displays the secondary DNS server address
for WAN interface.
IP Address-Displays the IP address of the LAN interface.
TX Packets-Displays the total transmitted packets at the
LAN interface.
RX Packets-Displays the total received packets at the LAN
interface.
Enable – Yes in red means such interface is available but
not enabled. Yes in green means such interface is enabled.
Line – Displays the physical connection of this interface.
Name – Display the name of the modem.
Mode - Displays the type of WAN connection (e.g., PPPoE).
Up Time - Displays the total uptime of the interface.
IP - Displays the IP address of the WAN interface.
GW IP - Displays the IP address of the default gateway.
TX Packets - Displays the total transmitted packets at the
WAN interface.
TX Rate - Displays the speed of transmitted octets at the
WAN interface.
RX Packets - Displays the total number of received packets
at the WAN interface.
RX Rate - Displays the speed of received octets at the WAN
interface.
ATM Statistics – Display the ATM layer information.
9
Advertisement
Table of Contents
