Table of Contents
Advertisement
Available settings are explained as follows:
Item
Enable Open Ports
Comment
Local Computer
Protocol
Start Port
End Port
After finishing all the settings here, please click OK to save the configuration.
Vigor122 User's Guide
Description
Check to enable this entry.
Make a name for the defined network application/service.
Enter the private IP address of the local host or click Choose
PC to select one.
Choose PC - Click this button and, subsequently, a window
having a list of private IP addresses of local hosts will
automatically pop up. Select the appropriate IP address of
the local host in the list.
Specify the transport layer protocol. It could be TCP, UDP,
or ----- (none) for selection.
Specify the starting port number of the service offered by
the local host.
Specify the ending port number of the service offered by the
local host.
37
Advertisement
Table of Contents
