Firstech 2W902R-SP User Manual page 6

Remote LED Functions and Descriptions
Your remote will communicate to and from your vehicle while in range. The LED will change colors indicating transmission, confirmation, remote start
run time and error confirmations.
Event LED Color
Runtime Remaining: 100 Percent Blue
Runtime Remaining: 66 Percent Blue
Runtime Remaining: 33 Percent Blue
All command confirmations Blue
All error confirmations Blue
By Firstech, LLC 10
LED Duration Chirp(s)
Once every 5 seconds Six times
Once every 5 seconds N/A
Once every 5 seconds N/A
Once or Twice depending on
Once or Twice depending on function
function
Three LED flashes Three chirps
Alarm LED Notifications
In the event that your alarm has been triggered, your remote will receive notifications based on what zone has been violated. Please see the following
table for details and a short description of each notification. Please note that these notifications are only available with MAX IT and ALARM IT systems.
Zone LED Color Chirp(s)
Chirps for 30 seconds or until
Door Trigger(s) Purple and Red
button tapped on remote
Chirps for 30 seconds or until
Trunk Trigger Purple and Red
button tapped on remote
Chirps for 30 seconds or unti
Hood Trigger Purple and Red
button tapped on remote
Chirps for 30 seconds or unti
Ignition On Trigger Purple and Red
button tapped on remote
Chirps for 30 seconds or unti
DAS Tilt Trigger Purple and Red
button tapped on remote
Prewarn Shock Sensor Blue and Red 8 Chirps
Chirps for 30 seconds or until
Full Shock Sensor Purple and Red
button tapped on remote.
Description
One of more of your door trigger zones have been violated.
Your trunk trigger zone has been violated.
Your hood trigger zone has been violated.
Your alarm is triggered when your
vehicle's ignition is turned on.
Your alarm is triggered when your
DAS detects tilt motion.
Your prewarn shock sensor zone has been violated.
Your full trigger shock sensor zone has been violated.
11 By Firstech, LLC