Firstech Compustar 2W901R-SS User Manual

Firstech Compustar 2W901R-SS User Manual

2 way 5 button lcd remote

Advertisement

dispositivo.
partes
las
FCC.
www.compustar.com
2W901R-SS_ES USER GUIDE.indd
1-2
este
utilizar
para
autorización
la
anular
pueden
conformidad
esta
por
aprobados
expresamente
sean
no
que
modificaciones
o
cambios
Los
indeseable.
funcionamiento
provocarun
aquellas
incluyendo
recibidas,
interferencias
las
aceptar
debería
perjudiciales.
interferencias
causar
debería
no
dispositivo
condiciones:
siguientes
las
a
sujeta
la
de
reglamentos
los
de
15
sección
la
de
requisitos
los
con
cumple
7087A-R901WSS
VA5JR901-2WSS
2W901R-SS
botones
5
de
LCD
de
bidireccional
remoto
siguientes:
remotos
controles
USUARIO
DEL
GUÍA
www.firstechllc.com
de
responsables
www.firstechllc.com
Advertencia:
puedan
que
dispositivo
(2)Este
(1)Este
está
utilización
Su
dispositivo
Este
:
IC
:
ID
FCC
Applicable to the following remote(s)
2W901R-SS 2 Way 5 Button LCD Remote
Control
los
a
Aplicable
FCC ID : VA5JR901-2WSS
IC : 7087A-R901WSS
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions;
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(1) This device may not cause harmful interference.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
(2) This device may accept any interference received, including interference that may cause undesired operation.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
CAUTION:
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
Changes or modifications not expressly approved by the party responsible for compliance could void
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
the user's authority to operate this device.
www.compustar.com
2011-3-26
14:33:50

Advertisement

Table of Contents
loading

Summary of Contents for Firstech Compustar 2W901R-SS

  • Page 1 Advertencia: indeseable. funcionamiento provocarun puedan aquellas incluyendo recibidas, interferencias aceptar debería dispositivo (2)Este perjudiciales. interferencias causar debería dispositivo (1)Este condiciones: siguientes sujeta está...
  • Page 2: Table Of Contents

    Table Of Contents Table Of Contents Advanced System Functions Introduction General System Functions Remote Start Error Diagnostic Drive Lock / lgnition Controlled Door Locks Sending Commands Alarm Diagnostic Warranty Coverage 2 Car Mode (Multiple Vehicle Control) 28 Receiving Commands Turbo Timer Mode Active Lock / Arm and Unlock / Disarm Limited Lifetime Warranty RPS (Remote Paging Sensor) Unlock / Disarm Passive Lock / Arm Quick Reference Secure Valet Switch Automatic Transmission Remote Start Function Timer Start Mode Button Lock 6 Manual Transmission Remote Start Function (Reservation Mode) 24 Cold / Hot Start Mode Activating Reservation Mode...
  • Page 3: Introduction

    Caution: The Manufacturer’s warranty will be voided if this product is installed by anyone other than an Authorized Firstech dealer. For complete warranty details visit www.compustar.com or the last page of this manual. Firstech remotes carry a 1 year warranty from original date of purchase. CompuStar Pro remotes carry a 2 year warranty.
  • Page 4: Quick Reference

    Quick Reference Quick Reference 3. If your system is set up for a secure valet option (optional), you will not be able to put the system into valet until the proper code has been entered using the Button Lock secure valet switch. The secure valet switch is the small button with bright blue LED on the front and if installed is the only way to override the alarm and/or remote start.
  • Page 5: Programming The Clock

    Quick Reference Quick Reference Programming the Clock 2 Way Remote Button Functions STEP 1: Enter remote programming mode by holding the Trunk and Start/Stop buttons for 2.5 seconds. The remote will beep and the LCD read “REMOTE MENU” to indicate that you have successfully entered programming mode. Button Duration LCD readout...
  • Page 6: Function Button Menu

    Quick Reference Quick Reference 2 Way Remote Button Functions Function Button Menu The following table shows the various features controlled by the Function button in combination with other remote buttons. Button Duration LCD readout Function/Description Hold For 2.5 Hold For 2.5 SIREN ON/SIREN OFF Turns siren chirps on/off (Note: With the siren chirps off, it will still sound in the event 0.5 seconds Button...
  • Page 7: Remote Option Menu Table

    Quick Reference Quick Reference Remote Option Menu Table Remote Option Menu Table Feature LCD Readout Lock Button Unlock Button Function / Description Feature LCD Readout Lock Button Unlock Button Function / Description Scroll Through Menu Tap the Function Button Moves down the remote option menu. RPS –...
  • Page 8: Way Remote Button Functions

    2.5 seconds Option programming menu 1 - Installers Only. If you would like additional information on the functionality of your 1 Way companion remote, please visit the support page at www.compustar.com 0.5 seconds Valet mode (see Valet Mode Section for details) to download the full user manual.
  • Page 9: Remote Lcd (Liquid Crystal Display) Diagram And Icons

    Remote LCD (liquid crystal display) Diagram and icons Remote LCD (liquid crystal display) Diagram and icons Your remote pager will indicate the status of your vehicle while in range. The unique LCD design will visually display such icons as lock/unlock status, Common Icons- remote start confirmation and remaining run-time, impact/shock notification, battery voltage, temperature display and much more.
  • Page 10 Remote LCD(liquid crystal display) Diagram and icons Impact This icon will be displayed if an impact to the vehicle is detected while the system is armed. The remote will beep rapidly while displaying this icon if the impact is hard; this means that the alarm was triggered. If it beeps slowly while displaying this icon, that means that the impact was soft and that the alarm simply gave four warning chirps.
  • Page 11: General System Functions

    Turbo mode General System Functions This icon will be displayed if Turbo mode is currently active. While Turbo mode is active, the vehicle will remain running for a preset time after the emergency brake has been set and the key has been removed from the ignition. 2nd Car Mode The remote transmitter functions are predetermined and programmed from the factory.
  • Page 12: Passive Lock / Arm

    General System Functions General System Functions Passive Lock / Arm Manual Transmission Remote Start Function (Reservation Mode) The system can be configured to passively lock and arm the vehicle. Put the system in passive by tapping the Function button three times In order to remote start a manual transmission vehicle, the system must first be set in Reservation Mode.
  • Page 13: Cancelling Reservation Mode

    General System Functions General System Functions Cancelling Reservation Mode Auxiliary Outputs / Window Roll-Down / Sliding Doors Reservation mode will be cancelled for the following reasons; You did not activate the parking brake prior to turning off the ignition. You pressed the foot brake after the key was removed from the ignition. Your system is equipped with two additional outputs that can be configured to control windows, open power sliding doors, open a power sliding You released the parking brake after the key was removed from the ignition.
  • Page 14: Silent Arm / Disarm

    General System Functions General System Functions Shock Sensor On/Off Silent Arm / Disarm Hold the Lock and Unlock buttons simultaneously for 2.5 seconds to turn the shock sensor on and off. The remote will beep Upon lock/arm and unlock/disarm, you can eliminate vehicle’s audible confirmation by muting the siren. Normally, the siren will twice, “SHOCK OFF”...
  • Page 15: Advanced System Functions

    Advanced System Functions Advanced System Functions The following section reviews advanced system functions. Many of these functions require multiple steps or additional programming by your local Turbo Timer Mode authorized Firstech dealer to be active. Drive Lock / lgnition Controlled Door Locks The built in turbo timer keeps the vehicle’s engine running for either 1, 2, or 4 minutes (programmable from dealer) after the vehicle key has been removed from the ignition.
  • Page 16 Advanced System Functions Advanced System Functions Alarm disarm and unlock RPS Touch (Remote Paging Sensor) To disarm hold your finger over the ‘Red Circle’ for 2.5 seconds. Once the LEDs start their circular pattern, enter your 4 digit code. (Refer to Step 4 above.) Two seconds after entering the 4th digit, your system will disarm.
  • Page 17: Rps (Remote Paging Sensor) Unlock/Disarm

    Advanced System Functions Advanced System Functions Alarm rearm and lock RPS (Remote Paging Sensor) Unlock/Disarm To rearm, knock on your sensor 5 times. RPS and car call functions do not require programming, however in order to unlock/disarm your vehicle you must program a 4 digit passcode using Alarm disarm and unlock the instructions below: To disarm, knock on your sensor 5 times.
  • Page 18: Secure Valet Switch

    Advanced System Functions Advanced System Functions Timer Start Mode Secure Valet Switch Timer start mode is used to cool or warm the vehicle automatically without use of the key or the remote. While engaged, timer start will The optional Secure Valet Switch prevents the alarm from being put into valet mode through cycling the ignition on/off five times. The Secure Valet activate even while the remote is out of range.
  • Page 19: Cold / Hot Start Mode

    Advanced System Functions Alarm LCD Notifications Cold / Hot Start Mode Alarm Trigger Notifications Cold/hot start mode works in conjunction with timer start mode (see above) and the temperature sensor. It allows you to configure your timer start In the event that your alarm has been triggered, your 2W901R-SS will receive notifications based on what zone or sensor has been violated. Please feature to check the vehicle’s temperature prior to starting.
  • Page 20: Programming 2Way 5Button Remotes

    Remote Coding / Programming Routine Remote Start Error Diagnostic IMPORTANT: Every Firstech remote must be coded to the system prior to performing any operations. All remotes must be coded at the same time. If the remote start fails to start the vehicle, the parking lights will flash three times immediately. Following those three flashes the parking lights will flash again corresponding to the error table.
  • Page 21: Limited Lifetime Warranty

    INCIDENTAL DAMAGES, DAMAGES FOR LOSS OF TIME, LOSS OF EARNINGS, COMMERCIAL LOSS, LOSS OF ECONOMIC OPPORTUNITY AND THE LIKE that may or may not resulted from the operation of Compustar, Compustar Pro, Arctic Start, Vizion, or NuStart. NOT WITH STANDING THE ABOVE, MANUFACTURER DOES OFFER A LIMITED WARRANTY TO REPLACE OR REPAIR THE CONTROL MODULE AS DESCRIBED ABOVE.
  • Page 22 KOREA By Firstech LLC Version 1.0 8102REUSC001502 / 2W901R-SS _ES Firstech, Firstech, 98032 Kent, 68th 21911 888-820-3690 gratuito: Teléfono LLC. Firstech, By Firstech, LLC. Toll Free : 888-820-3690 21911 68th Ave S Kent, WA 98032 Versión Firstech 2W901R-SS_ES 8102REUSC001502 KOREA 2W901R-SS_ES USER GUIDE.indd 43-44 2011-3-26...
  • Page 23 Firstech, Firstech, compra. siguientes días diez www.compustar.com garantía registro tarjeta completa válida será garantía esta Además borrados. alterados desfigurados, sido serie número fecha código invalidada automáticamente será producto garantía garantía validez PRECEDENTEMENTE. DESCRIPTO CONTROL MÓDULO REMPLAZAR PARA GARANTÍA OFRECE FABRICANTE AQUÍ,...
  • Page 24 Firstech, Firstech, remotos. controles hasta reconocer pueden deP2WSSR excepción (con sistemas Todos adicional. remoto control cada confirmando directamente. parpadearán posición luces unidireccionales. remotos controles Cierre botón bidireccionales contáctenos representante Contacte mismo. distancia arrancador reparaciones efectuar trate recomendamos controles botón presionando remotos controles otros...
  • Page 25 Firstech, Firstech, neumáticos. llantas costosas transgredida sido impactos preventivo sensor zona STAGE SHOCK preservar para inclinación sensor alarma hacia principal alimentación proteger para repuesto batería agregando inversión transgredida sido impacto detector activación zona STAGE SHOCK Proteja Firstech. provistos opcionales sensores agregar podrá...
  • Page 26 Firstech, Firstech, seguro. Valet código entrar para etapas Siga programado. está seguro Valet – contacto Ponga Etapa Reloj. icono arriba justo iluminará Temporizador icono » START TIMER « parpadeando mostrará pitido, entonces emitirá remoto control mático. auto arranque modo activar etapa repitiendo número...
  • Page 27 Firstech, Firstech, desactivación/apertura. código entrar para etapas Siga programado. ahora está desactivación/apertura para código – motor contacto Ponga Etapa números. todos entrar para etapas Repita Etapa etapa repitiendo decir, manera, misma cifra segunda entre AZUL, rápidamente parpadear comience lentamente. AZUL parpadeando cifra primera...
  • Page 28 Firstech, Firstech, segundos. durante » Circle « sobre dedo apoye reactivar Para silencioso/vibración. modo quedó remoto control indicar cierre alarma Reactivación para encendido quedará vibración icono programación. correctamente salido indicando pitido emitirá remoto control segundos. durante simultáneamente Llave/Arranque Maletero botón presionando programación modo...
  • Page 29 Firstech, Firstech, sistema. mismo equipado estará 2ovehículo para programado remoto control requiere vehículo segundo modo Importante: desactivado. sido vehículo modo confirmando desaparecerá vehículo icono pantalla aparecerá » « pitidos, emitirá remoto control activado. sido vehículo segundo modo confirmando aparecerá vehículo icono pantalla aparecerá...
  • Page 30 Firstech, Firstech, silencioso/vibración. modo está remoto control indicar para pantalla iluminado quedará vibración icono programación. modo correctamente salió indicando pitido emitirá remoto control sistema. activación después segundos. durante Arranque Maletero botones simultáneamente apretando remoto control programación Salga Etapa segundos durante impacto reconoce impactos...
  • Page 31 Firstech, Firstech, extras. trabajo piezas necesitar podría opcional función maletero destrabado Importante: correctamente. enviada maletero destrabado orden indicar para pantalla aparecerá » OPEN TRUNK « iluminará maletero icono pitidos, emitirá remoto control alcance, zona está vehículo. puerta quinta tercera maletero destrabar para maletero...
  • Page 32 Firstech, Firstech, parará. motor », « posición llave girar antes cerrado vehículo interior llaves presiona freno pedal vehículo. conducir antes » « posición gírela contacto vehículo llave Ponga Importante: dejar cuidado Tenga reservado. modo entra cuando vehículo cerrar/activar para preprogramado está...
  • Page 33 Firstech, Firstech, sistema. abrirá/desactivará segunda, alarma apagará botón presión primera alarma; desactivación señal recibido haya vehículo. temperatura muestra remoto control mientras aparecerá icono Este remoto control hasta esperar deberá suena) bocina parpadean posición luces suena, sirena disparada fuera alarma Importante: Temperatura remoto control...
  • Page 34 Firstech, Firstech, abierto. está capó porque arranca vehículo indicará distancia, mano. freno ponga cuando abrirán puertas seguros manual, transmisión vehículos apague. vehículo arrancar trata mientras apareciera icono este sonó. alarma indica Esto icono. este aparición contacto cuando abiertos serán puertas seguros instalador.
  • Page 35 Firstech, Firstech, señal. transferencia falla remoto control pila voltaje vehículo, batería voltaje vehículo, interior temperatura Turbo, modo restante tiempo distancia, arranque para motor marcha tiempo actual, hora Muestra voltaje auto Reloj voltaje auto encen. cont. puertas cierre temperatura encen. cont. puertas cierre temperatura...
  • Page 36 Valet Modo sección (Vea Valet Modo segundos completo. instaladores. para Sólo – programación opciones Menú segundos usuario manual bajar para www.compustar.com asistencia página visite unidireccional, remoto control sobre información más obtener desea dispara) alarma igual segundos sonará ésta anulados, sirena...
  • Page 37 Firstech, Firstech, utilizar. desea función botón manual apriete continuación, botones. desbloquear para cualquiera – HOLD botones automática botón apretar debe activa, está remoto. control – HOLD Bloqueo función Pone botones bloqueo automática función desactiva Activa – – ajustada. sido alerta cual función Alerta...
  • Page 38 Firstech, Firstech, pasivo modo Valet modo veces detalles. más obtener para remoto control remoto desactiva Activa desactiva Activa Apretar opciones Menú cuadro etc.) activo/desactivo, vibración, modo reservado, control opciones segundos arranque programado arranque (reloj, remoto control opciones menú acceso menú cuadro vehículo modo...
  • Page 39 Firstech, Firstech, detalles. más tener para Función botón menú abajo más cuadro funciones. varias desactiva activa botón Este parará. motor Repita arrancará. vehículo botón este presiona START REMOTE segundos distancia. arranque para turbo temporizador EXTEND veces apretar para encendido tiempo Reinicia motor.
  • Page 40 Firstech, Firstech, Valet. modo salir para necesario remoto control veces. parpadearán posición luces parpadeo, primer después Poco Valet. modo está sistema confirmar para apagarán encenderán estacionamiento luces segundos. dentro » « » « posiciones entre veces contacto llave girar haciendo Valet modo activar...
  • Page 41 Para línea. registrarse debe unidad cada garantía para registro tarjeta incluimos compra.No siguen días dentro registrarse para formulario complete favor enwww.compustar.com. línea garantía registrar puede años. garantía tienen compustar remotos controles compra. original fecha partir año garantía tienen Firstech remotos controles manual.
  • Page 42 Firstech, Firstech, botones bidireccionales iconos Diagrama líquido) (cristal remotos controles Programación impactos sensor desactivar Activar pantalla remoto Control silenciosos Cierre/Apertura programación Rutina vibración silencioso modo remoto Control remoto/ control Programación batería temperatura sobre Información unidireccional remoto control botones Funciones corredizas cristales/Puertas auxiliares/Bajar Salidas...

Table of Contents