Test Program - Daewoo EGSP-130E Technical & Service Manual

Test Program

In order to check the operation of components of appliance and find out the
malfunction, we designed this program for technician.
How to activate Test Program
With the door opened and machine off, press the INTENSIVE program button.
Hold down the INTENSIVE program button and press the POWER button until
the machine enter into Test Program. At that moment, all the LED are flicker
with 1Hz. When close the door, there will be a display of model code, and after
2 seconds the test program will be activated.
During test program running, all the program indicators flicker circularly from
left to right. When water temperature has reached 60 degree
program indicators keep lighting
Attention
During test program running
enter into next step except inlet valve step
Once pressure switch reset in the testing process, the appliance will enter
water until pressure switch act.
If open the door during testing process, the appliance will pause and all the
program indicators will keep lighting. Appliance will continue to run the
program after closing door.
In test program, E1, E2, E3, E4, E6 and E7 are valid.
.
,
you can press INTENSIVE program button to
(
Test Program
).
,
all the
46