PCB
Printed Circuit Board is the control center of dishwasher, which receive and
process signal from components, send order to components and deal with the
feedback information, etc.
Access PCB
Removing the control panel
The control panel can be removed from dishwasher door.
1. Remove the six screws securing the control panel to the door.
2. The control panel will drop down and be free of the door. But, the wiring will
still connected to the control panel.
3. Disconnect the connector form PCB.
4. Remove the two screws shown above securing the PCB to control panel.
5. Remove the PCB.
6. Reverse the above procedure to install.
on
1
1
08
Off
2
2
PCB
->
Theory of parts
32