Philips StudioPower FC9080 SERIES Directions For Use Manual page 9

accessory clip (specific types only)
1 Snap the crevice tool and the small nozzle into the clip.
2 Snap the accessory clip onto the tube.
3 Pull the accessory clip from the tube to remove it.
accessory holder (specific types only)
1 Snap the accessory holder onto the handgrip.
2 Store accessories in the accessory holder by pushing them into the
holder. To detach the accessories, pull them out of the holder.
You can store two accessories at a time in the accessory holder.
- Crevice tool and small nozzle.
Note: The small nozzle must be placed in the accessory holder as shown in the
picture.
- Crevice tool and small brush.
tri-active nozzle
The Tri-Active nozzle is a multi-purpose nozzle for carpets and hard floors.
EnglISh
9