Philips StudioPower FC9080 SERIES Directions For Use Manual page 13

1 Pull the cover upwards to open it.
2 Lift the dustbag holder out of the appliance.
Make sure you hold the dustbag upright when you lift it out of the
appliance.
3 Pull at the cardboard tag to remove the full dustbag from the holder .
When you do this, the dustbag is sealed automatically.
,
4 Slide the cardboard front of the new dustbag into the two grooves of
the dustbag holder as far as possible.
5 Put the dustbag holder back into the vacuum cleaner.
Note: If no dustbag has been inserted, you cannot close the cover.
6 Push the cover downwards to close it.
EnglISh
13