Dacia 4435 User Manual page 25

User's manual
1 - INTRODUCTION.
The anti - intrusion alarm system is operated by a with a
security code. This technology offers an extremely high level
of protection against any attempt to reproduce the code.
The Personal Identifi cation Code is a four digits code which
is already stored in the system. The sticker with the PIN code
must be applied by the installer on the PIN code card you
should have got from your installer.
Keep the PIN code card always with you. The code is
required to emergency override the system the remote
control doesn't work or if you've lost it. The PIN code is also
used for other scopes (driver recognition code for the anti
hi-jack functionality and as activation code for the garage
mode). Upon your request and submitting the card to your
installer, he will personalize you the PIN code.
We advise you to stick the PIN CODE, which may be found
on the rear of the control unit, adhesive label on to the PIN
CODE CARD.
ENG
06DE3575A.indd 25 06DE3575A.indd 25
2 - ARMING AND DISARMING WITH THE COBRA
REMOTE CONTROL.
To arm the system press the pushbutton "A" of the Cobra
remote control.
The arming status is confi rmed by:
• vehicle doors locking;
• audible signals (if activated);
• LED of the emergency panel illuminated.
The protection features of the system become active after a 25
s arming period has elapsed (when the LED of the emergency
panel starts blinking).
Button A > to arm the alarm and to lock doors.
B
To disarm the system press the pushbutton "B" of the Cobra
remote control.
The disarming status is confi rmed by:
• vehicle doors unlocking;
• audible signals;
• LED of the emergency panel OFF.
Button B > to disarm the alarm and to unlock
B
A
doors.
A
26/03/2012 11.47.32 26/03/2012 11.47.32
25