Cleaning And Maintenance - Bonavita BV01002US Instruction Manual

CLEANING AND MAINTENANCE

Proper care will ensure years of service from this coffee brewer. Aside from keeping the brewer
clean and descaling when necessary, there is no user maintenance required.This brewer contains
no internal user serviceable parts. Leave servicing and repairs to qualified personnel.
Cleaning the Brewer Lid
and Shower Head
The brewer lid and shower head
are removable, and are top rack
dishwasher safe.
1. Pull the front edge of the brewer
lid upwards to remove.
2. Remove the shower head.
3. Clean.
4. Re-install shower head separately
from brewer lid, for better shower
head alignment.
5. Re-install brewer lid.
D ESCA L I NG:
In hard water areas, scaling from limestone content in the water may build up in your brewer.
Scaling can lead to extended preparation time and possible damage to your Bonavita cofee
brewer.
• The CLEAN button will light up red when descaling is recommended.
• To descale:
1. Fill the water tank according to the descaler manufacturer's instructions. (Fig.a)
2. Press the CLEAN button. Red light will begin to flash. (Fig.b)
The descaling process takes about 25 minutes. (Fig.c)
3.
4. When the process is complete, both the red and green light will turn off.
5. After the descaling process is finished, brew two more times with fresh, clean water. (Fig.d)
• If you live in an area with above average limestone content, you may have to descale
more frequent than when the CLEAN light goes on. If your brewer shows uncommon
loud noise or takes longer than normal to brew, then you should descale.
a
CAUTION:
Always unplug the coffee brewer before
cleaning.
The filter basket may be cleaned in the top
rack of a dishwasher.
Step 1: Pull the lid
from the water tank
to remove it.
b
c
Step 2: Detach the
shower head from the
pipe to remove it.
d