How To Use The Remote - Sony STR-GA9ESG Operating Instructions Manual

SECURITY Remote
NO. commander
0
1 2 3 4
1
1 2 3 4
2
1 2 3 4
3
1 2 3 4
4
1 2 3 4
5
1 2 3 4
6
1 2 3 4
7
1 2 3 4

How to Use the Remote

The supplied remote lets you perform almost all of the
receiver operations. Operation is simple, just move the
remote in the direction you want to move the pointer
(hand shaped icon) on the on-screen display. Position
the pointer so that the finger tip is positioned on one of
the on-screen items, then press and quickly release the
button on the remote to "click" the item.
FUNCTION
S
O
Blank U
N
area
D
0 ( )
Click button
To turn on the receiver
Press the click button on the remote once or twice to turn on
the unit.
SECURITY Remote
NO. commander
8
1 2 3 4
9
1 2 3 4
10
1 2 3 4
11
1 2 3 4
12
1 2 3 4
13
1 2 3 4
14
1 2 3 4
15
1 2 3 4
ALL
OFF
Pointer
VOL
+
–
SUB USER
p P = +
Preparing and Using the Remote
If the on-screen display does not appear even after the
batteries have been inserted into the remote (see page
14), reinsert the batteries and place the remote on a flat
surface for about 10 seconds.
Hints on handling the remote
• A slight wrist movement is all you need to direct the
pointer. (See previous illustration.)
• Hold the remote with its "click" button facing up, as
shown below. If the click button is oriented
diagonally, the pointer will not move in the same
direction that you move the remote.
• The pointer will not move if you move the remote
along a flat plane as shown below.
• The on-screen display disappears automatically after
a few seconds when you place the remote on a flat
surface.
To make the on-screen display disappear faster,
position the pointer in the blank area, hold down the
click button to vanish the display, then place the
remote on a flat surface and release the click button.
To recall the on-screen display, pick up the remote.
Notes
• The position of the pointer freezes when you hold down
the click button.
• If the pointer begins drifting on the screen even while the
remote is stationary, place the remote on a flat surface
until the on-screen display disappears. The pointer
should behave normally the next time you use the remote.
• If your hand is very dry, the on-screen display may not
appear when you touch the click button. In this case, press
the click button.
Caution
Since the remote contains delicate circuitry and parts, do not
subject it to sudden changes in temperatures or to shock.
15