Enjoying Two Components At The Same Time - Sony STR-GA9ESG Operating Instructions Manual

Using the Controls on the Front Panel
Scanning indexed stations (index tuning)
Once you select a station index, you can scan all the
stations with that station index.
1
Select TUNER.
The last station you received is tuned in.
2
Press DISPLAY so that the index mode appears in
the display.
The station index for the last station you received
appears in the display.
If "_ _ _ _ " appears
The station does not have an station index.
3
Press INDEX + or – to select the station index you
want to scan.
4
Press PRESET + or – to select the station you want
receive.
To select a different station index
Press INDEX + or – to select the one you want, then press
PRESET + or – to select a station.
Indexing program sources
1
Select the FUNCTION you want to label.
2
Press DPC MODE repeatedly until the INDEX
indicator lights up.
3
Create an index name by using the DIGITAL
PROCESSING CONTROL knobs as follows:
Turn CHARACTER to select a character, then
turn POSITION to move the cursor to the next
position.
To insert a space, turn CHARACTER until a blank space
appears in the display, the space is between " and A.
The index is stored automatically.
If you've made a mistake
Turn POSITION until the character you want to change
flashes. Then select the right character.
You can display either the index or function name
Each time you press DISPLAY, the display switches
between the function name and the index name.
For the on-screen operations, see page 36.
50
Enjoying Two Components at
the Same Time
1
Turn FUNCTION to select the video program
source.
2
Press MODE repeatedly so that "AUDIO MODE"
appears in the display.
The current video signal is fixed and you can
select audio from any other source (except 5.1
INPUT) without changing the current video
signal.
3
Use FUNCTION (or TAPE MONITOR) to select
the audio you desire.
If you want to change the video program selected
in step 1, press MODE to select "VISUAL MODE"
and you can select video from another source
while maintaining the current audio signal.
4
Start playing the respective video and audio
sources.
Note
If you do not select the audio or video source within 8
seconds of pressing MODE, the "AUDIO MODE" or
"VISUAL MODE" is cancelled and the audio or video source
will not be fixed. In this case, press MODE again to display
the mode you desire. The mode changes as follows:
VISUAL MODE / AUDIO MODE / off
For the on-screen operations, see page 39.