Unpacking; Hookup Overview - Sony STR-GA9ESG Operating Instructions Manual

Getting Started

Unpacking

Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander RM-VP1 (remote) (1)
• Size AA (R6) batteries (2)
• Remote control (RC) antenna (1)
• IR repeater (1)
• Getting Started and Basic Operation Guide (1)

Hookup Overview

The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 51.
RC Antenna
Hookups (8)
TV/VCR Hookups (12)
Speaker
System
Hookups (10)
TV
Front
VCR
speaker
(L)
LD player
CD player Center
speaker
Rear Tape deck
speaker
(L) DAT/MD deck
Turntable
Audio Component
Hookups (9)
Before you get started
• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
Antenna Hookups (9)
AM/FM antenna
IR Repeater
Hookups (8)
Front
speaker
(R)
Active
woofer
Rear
speaker
(R)
Video camera
Video game
TV/VCR
Hookups (12)
7