Tool Operation - haupa HS-8 Instruction Manual

8. Check the oil level on occasion. While re-filling pay attention to outermost
cleanness. Use only oil according oil specification (s. Technical Data).
9. Keep children, pets and unauthorized persons away from the workplace.
10. Keep the safety instructions with the tool.
3 Tool – Operation
HS-8 is a tool for punching plates according cutting material (s. Technical Data).
Please consider the following constructions to ensure an operation without any
problems.
.
Operation:
1- Pre-drill with ! 10, 5 after marking out and
marking the centre.
3- Fit distance bushing and matrix.
2- screw rod (thread entirely) in.
.
4-Insert rod into drill-hole and
screw cutting edge on.
3