haupa HS-8 Instruction Manual page 4

5-Close the drain valve by reversing
the lowering lever (push).
7- Pull package including button out.
9- unscrew the cutting edge and
remove the button.
Necessary to consider:
The matrix must be insert into the distance bushing's spigot at working with tools
for Ø15,2mm (PG9) and Ø16,5mm on metrical threads to ensure that the cutting
edge rides in centre into matrix.
6-Pump movements till the plate is
separated by the cutting edge.
8- Activate return by throwing
the lowering lever.
4