Turning Power On/Off; Turning On The Main Power - Sharp PN-R556 Operation Manual

Caution
• Turn on the monitor first before turning on the PC or
playback device.

Turning on the main power

Main power switch
Caution
• The main power must be turned on/off with the main power
switch. Do not connect/disconnect the power cord or turn
the breaker on/off while the main power switch is on.
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
• For a complete electrical disconnection, pull out the main
plug.
16
E

Turning Power On/Off

Turning power on/off
Press the POWER button to turn the power ON/OFF.
You can also turn the power ON by pressing the MONITOR
ON button on the remote control and turn the power OFF by
pressing the MONITOR OFF button on the remote control.
Power LED
Status
Green lit
Orange lit
Green flashing
Caution
• When switching the main power switch or the POWER
button off and back on, always wait for at least 5 seconds.
A short interval may result in a malfunction.
TIPS
• When the main power switch is off, the monitor cannot be
turned on.
• If the monitor is in the input signal waiting mode and you
press the POWER button, the monitor enters standby
mode.
• Setting the SCHEDULE flashes the power LED alternately
in red and orange in standby mode.
• To disable the logo screen from displaying when turning the
power ON, set LOGO SCREEN to OFF on the OTHERS
menu. (See page 29.)
Power button
Status of the monitor
Power on
Power off (Standby mode)
Input signal waiting mode