Sharp PN-R556 Operation Manual page 59

nPower management
This monitor conforms to VESA DPMS and DVI DMPM. Both your video card and computer must support the same standard in
order for the monitor's power management function to work.
DPMS: Display Power Management Signaling
DPMS Screen
consumption
ON STATE Display
STANDBY
No
SUSPEND
display
OFF STATE
*1 Upper value: PN-R556, middle value: PN-R496, lower value: PN-R426.
*2 When SUPPLY USB POWER is set to POWER ON ONLY and no optional part is attached.
nDDC (plug and play)
The monitor supports the VESA DDC (Display Data Channel) standard.
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect
plug-and-play monitors.
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.
Power
Hsync Vsync
*1
175 W
155 W Yes Yes
135 W
No Yes
2
2.5 W*
2
2.5 W* Yes No
2
2.5 W*
No No
DMPM: Digital Monitor Power Management
DMPM Screen
Monitor ON Display
Active OFF No display
Specifications
Power
*1
consumption
175 W
155 W
135 W
2
2.5 W*
2
2.5 W*
2
2.5 W*
59
E