Entering Identity Information; Network Configuration - Paradyne M/HDSL Standalone Termination Unit Hotwiret 7986 Installation Instructions Manual

Entering Identity Information

Network Configuration

4
After accessing your unit for the first time, use the Change Identity screen to
determine SNMP administrative system information that will be displayed on the
Identity screen of the Status branch. To access the Identity screen, follow this
menu selection sequence:
Main Menu Control
The following illustration shows a network application using a 2-port Hotwire 8786
or 8784 M/HDSL Termination Unit for access concentration in a central office
(CO). A frame relay switch and a router are connected, through the termination
unit, to partner units supporting a host or router, and frame relay encapsulated or
unframed data.
Frame
Relay
Switch
Router
Termination Unit
CO Site
LTU
7986 (G.703)
7986 (G.703)
March 1999
Change Identity
CO Site
2.048 Mb
SDSL
8786 or 8784
in 8600 DSLAM
G.703
E1 Host
(Frame Relay
7986
Encapsulated
Data)
G.703
Router
over
(Frame Relay
7986
Encapsulated
Data)
EIA-530A
V.35
Router
7985
Customer
Premises (CP)
Customer
Premises
NTU
V.35
G.703
7986-A2-GZ40-00
7985
7986
98-16151