Start Mapping at Well Location
The Start Mapping at Well Location screen is only shown if automatic mapping
is selected. This option allows you to enter the location of the well that will be
the starting point for automatic mapping.
S T A R T
A T
•
•
ELx800 Operator's Manual
M A P P I N G
W E L L
L O C A T I O N : A 0 1
Use the
numeric
and
cursor location. For any well location, only the
the first character and
valid entry range is from A01 to the last well on the plate, depending on
the plate type and the number of blanks, standards, controls, and/or
samples defined in the assay.
Press
ENTER
to save the well location and continue.
Define (Method, Map, Formula and Curve) |
alpha
keys to enter a letter or number at the
numeric
for the second and third characters. The
alpha
keys are active for
57