Table of Contents
Advertisement
54
Chapter 3: Operation
|
MAP screens appear in the order that they were defined in the assay. If the
assay has a closed variable, the screen for this variable is omitted.
D E F I N E :
M E T H O D
At the DEFINE options screen, select MAP to begin the plate map process.
Map Generation
"Map Generation" represents the method by which blanks, controls, standards,
and/or samples are assigned to specific locations on the plate.
M A P
A U T O
•
•
•
M A P
G E N E R A T I O N :
M A N U A L
Select AUTOMATIC PLATE MAP GENERATION to instruct the software
to automatically generate a plate map after the blanks, controls,
standards, and/or samples have been defined.
Select MANUAL PLATE MAP GENERATION to indicate that the well
assignments will be performed manually (by the user) at Define and/or
Read time.
Press
ENTER
to save the selection and continue.
Use the SHIFT-CLEAR keys to clear any previously defined
manual map.
F O R M U L A
M A N U A L
C U R V E
Bio-Tek Instruments, Inc.
Hide quick links:
Advertisement
Table of Contents
