Table of Contents
Advertisement
dCS Vivaldi Upsampler User Manual
Software Issue 1.2x
December 2015
Basic setup with a PC
• Connect one of the computer's USB ports to the
USB1
port on the Upsampler's rear panel.
• Press the
Input
USB1
button repeatedly until
is displayed.
Open the Menu and select
Settings > Sync Mode > Master
Mode.
This is the Upsampler's default
Sync Mode
for the USB and Network interfaces. The Upsampler does
not lock to the source clock, but uses the Upsampler's internal clock instead. A control signal is sent
back to the source to control the delivery of data bursts from the computer. This arrangement avoids
the use of the computer's inaccurate and jittery clock.
Analogue
outputs
to Amplifier
Figure 4 – Using a Vivaldi Upsampler and DAC with a laptop
Page 15
Vivaldi Upsampler Manual v1_2x
English version
Advertisement
Table of Contents
