Using The Puccini U-Clock With A Puccini Player - Data Conversion Systems dCS Puccini U-Clock User Manual

dCS Puccini U-Clock User Manual

Using the Puccini U-Clock with a Puccini Player

Connect the system as shown below. You can use any of the U-Clock's four
either of the two SPDIF
When playing a disc, make sure the U-Clock is set to 44.1kHz, so that the Puccini Player can lock to it
and benefit from the improved clock quality.
Set up the USB source as described on the next page and set the Puccini Player to the
When using a USB source, the U-Clock will set its clock frequency to suit the sample rate of the data
stream on the USB input.
~ 50/60 Hz, 15W
Fuse T 500mA L
~ 50/60 Hz, 40W
Fuse T 500mA L
Puccini Player software v1.0x does not support locking to the
!
external input is selected. This is OK, as the USB source is locked to the U-Clock, but
there is room for improvement. We are planning a software update to address this for
Spring / Summer 2009.
Filename: Puccini U-Clock Manual v1_0x.doc
outputs.
WORDCLOCKS OUT
1 2
dCS Model: Puccini Player
ANALOGUE OUTPUTS
BALANCED
LEFT
L
Balanced & Unbalanced
Analogue Outputs
To preamplifier / power amplifier
Figure 2 – Using the Puccini U-Clock with a Puccini Player
Windows
Vista / XP
or Mac OSX
SPDIF
3 4 1 2
RCA
BNC
DIGITAL
W/CLK
(PCM) O/Ps
IN
LEFT
RCA 1
UNBALANCED
OUT
RCA 2
RIGHT
RIGHT
R R L
Page 7
Software Issue 1.0x
October 2008
Word Clock Outputs and
RCA1
USB
USB
DIGITAL
(PCM) INPUTS
RCA 1
RCA 2
Word Clock Input
English version
input.
dCS Model:
Puccini U-Clock
SUC
while an