Step 7 - Setting The Sync Mode For Computer Audio Sources; Using The Dac In Universal Master Mode - Data Conversion Systems DCS VIVAlDI User Manual

dCS Vivaldi Upsampler User Manual
STEP 7 – Setting the Sync Mode for Computer Audio sources

Using the DAC in Universal Master Mode

You can improve the quality of playback from the Upsampler's USB and Network interfaces by locking
the Upsampler to the DAC's clock. This does not work well in standard Master Mode as the sample
rate may change between 44.1k-related rates and 48k-related rates. To solve this problem, the Vivaldi
DAC with software v1.10 (or later) has a Universal Master Mode which produces a 38.4kHz word clock
from which either base rate can be derived easily. Vivaldi Upsampler v1.10 (or later) can lock to this
frequency.
• Add a connection from the DAC's
shown below. A PC is shown connecting to USB1, but the data source can be connected to
Network
or the
Analogue
outputs
to Amplifier
• Select the Upsampler input you are using.
• Select the DAC's
Open the DAC's Menu and select
Open the Upsampler's Menu and select
The Upsampler will lock to the DAC's clock and will stay locked at any sample rate.
Vivaldi Upsampler Manual v1_2x
interface instead.
Figure 6 – Using a Vivaldi Upsampler and DAC In Universal Master Mode
AES3+4
input.
Word Clock Output to the Upsampler's
Settings > Sync Mode > Universal Master
Settings > Sync Mode > Word Clock
Page 20
Software Issue 1.2x
December 2015
Word Clock In1
as
USB2
Mode.
1.
English version