Table of Contents
Advertisement
dCS Vivaldi Upsampler User Manual
Using the Menu
The menu gives the user access to a range of additional features. It also allows new features and
performance enhancements to be added later by software updates.
The menu is controlled by four buttons.
• Press the
MENU
button to open the menu or select a setting.
• Press the
►
button to page forward through the menu.
• Press the
◄
button pages backward through the menu.
• Press the
POWER
Use the Menu Guide sheet to help you find the right menu page.
Each unit in the range has either four or five top-level menu pages:
The
INFORMATION
contact details.
Each model has a different
are not directly accessible from the front panel.
The
CONFIGURATION
setup and reset the unit.
The
DISPLAY SETTINGS
The
SIGNAL GENERATOR
contains test and set-up routines.
►
Use the
button to move the blue highlight to the menu you want, then press the
select it. The next menu level down is displayed. Use the
page you want, then press the
Select the return icon to go back to the previous menu level.
Vivaldi Upsampler Manual v1_2x
button to close the menu or just wait 10 seconds.
menu gives unit set-up details, software issues, serial number and
SETTINGS
menu allows you to lock important settings, save a standard
menu is used to adjust the display.
menu (featured on the Transport, Upsampler and DAC only)
MENU
button to display the information or change the setting.
menu, which allows you to set some features that
►
button to move the highlight to the menu
Page 30
Software Issue 1.2x
December 2015
MENU
button to
English version
Advertisement
Table of Contents
