Customizing The Function Button - burroughs SmartSource Advantage User Manual

Customizing the Function Button

SmartSource Advantage is equipped with one programmable function button (F1) that can
be customized to automate a number of predefined operations, such as scanning to a file,
sending an image to your printer, scanning for OCR, etc. Customizing is done through the
"Save Settings to Function Button" command, as explained below.
1.
2.
3.
4.
5.
Note: When you have finished the settings
for the function button, you will need to
exit ScanWizard DI before pressing the
function button on the scanner to carry out the defined task. If you press a function button
on the scanner while ScanWizard DI is activated, the scanner only performs a preliminary
scan of the image. To browse the settings of your original function button (in case you
do not remember the settings that you assigned previously), use the "Load Settings to
Function Button" feature. To do this, select the "Load Settings to Function Button" command
from the File menu, choose the function button to be previewed, and click the OK button.
The saved function button settings are restored to the ScanWizard DI control panel. You
can then continue to use these settings until you need to specify new settings for the
buttons.
16 SmartSource Advantage User's Manual
Launch ScanWizard DI (either as a stand-alone by clicking the program icon, or by
using the "File-Import" or "Scan" command from an application program).
Follow the procedures (steps 3 through 7) for the "Scan a Stack of Documents" section
to specify your scanning requirements in the ScanWizard DI panel.
When you finish specifying the scanning settings, choose the "Save Settings to
Function Button" command from the File menu. The dialog box appears.
In the dialog box, specify your requirements for the F1 button.
a) Select F1 to be defined from the Button options.
b) Key in your preferred string in the Label edit box for the selected function button.
c) Make your selection among the Function radio buttons below to define your
selected button. The three functions provided are:
– Scan To: Captures images that can be automatically saved as files or sent to
another application for further processing. This is the default selection.
– Copy: Scans the image and sends it to your printer, transforming your
scanner and printer into a convenient copy station. Simply specify the
number of copies you want.
– OCR: Performs OCR (Optical Character Recognition) of a document and
converts it to a fully editable digital file. Saves time from retyping documents
into your word processor.
Specify the function settings
according to your requirements, then
click the OK button. The parameters
currently specified for your selected
function button are saved.