To Load Cards; Document Notices - burroughs SmartSource Advantage User Manual

To Load Cards

1. Open the top cover (document feed tray).
2. Load the card face up into the card tray located at the bottom of the document feed
tray, with the top edge facing toward the tray.
3. Align the card against the left edge of the card tray.
CARD

Document Notices

Note: There are several precautions and reminders about using the scanner correctly.
Please refer to the section below for details.
• The scanner is not designed for scanning photos; doing so may damage your originals.
Burroughs accepts no responsibility for damage that may arise from misuse of equipment.
• The scanner can handle document specifications:
– Paper size:
– Paper weight:
– Card thickness:
• If the documents are torn, curled, or wrinkled, do not put them into the scanner to
scan, because they may cause paper jams.
• Remove paper clips or staples before placing documents into the tray. DO NOT use
the scanner to scan documents with paper clips or staples because they may cause
paper jams or damage the scanner.
• Feeder capacity: Up to 20 sheets of 20 lb. paper or 1 card
Ready
Error
F1
Min. 3.15" x 2.1" (80 mm x 51 mm)
Max. 8.5" x 65" (216 mm x 1651 mm)
10.7 to 32 lbs. (40-120 g/m
Up to 0.078" (2 mm).
SmartSource Advantage User's Manual
)
2
15