Hearing Aid Compatibility; Specific Absorption Rate (Sar) - Doro 5516 Manual

example GPL or LGPL) to you on an appropriate media, against an administrative fee
covering Doro AB's cost for handling the distribution and costs for media. Please direct
such request to Doro AB, Open Source Software Operations, Magistratsvagen 10, SE
226 43 Lund, Sweden. To be valid, such a request must be made within three (3) years
from the date of the distribution of this product by Doro AB, or in the case of code li-
censed under the GPL v3 for as long as Doro AB offers spare parts or customer support
for this product model.

Hearing aid compatibility

Note!
For hearing aid compatibility, turn off Bluetooth connectivity.
This phone is hearing aid compatible. Hearing aid compatibility is not a guarantee that
a specific hearing aid will work with a specific phone. Mobile phones contain radio
transmitters that may interfere with hearing aid performance. This phone has been
tested for use with hearing aids, for some of the wireless technologies that it uses, but
there may be some newer wireless technologies that have not been tested yet for use
with hearing aids. To ensure that a specific hearing aid works well with this phone, test
them together before making a purchase.
The standard for hearing aid compatibility contains two types of ratings:
•
M: To use your hearing aid in this mode, make sure that your hearing aid is set to
"M-mode" or acoustic coupling mode, and position the phones receiver near the
hearing aid's built-in microphone. For the best results, try using the phone in differ-
ent positions relative to your hearing aid—for example, placing the receiver slightly
above the ear may result in better performance for hearing aids with microphones
positioned behind the ear.
•
T: To use your hearing aid in this mode, make sure that your hearing aid is set to "T-
mode" or telecoil coupling mode (not all hearing aids have this mode). For the best
results, try using the phone in different positions relative to your hearing aid—for ex-
ample, placing the receiver slightly below or in front of the ear may result in better
performance.
Your device meets the M3/T3 level rating.

Specific Absorption Rate (SAR)

This device meets applicable international safety requirements for exposure to radio
waves. Your mobile device is a radio transmitter and receiver. It is designed not to ex-
ceed the limits for exposure to radio waves (radio frequency electromagnetic fields) rec-
ommended by international guidelines from the independent scientific organization
ICNIRP (International Commission of Non-Ionizing Radiation Protection).
The radio wave exposure guidelines use a unit of measurement known as the Specific
Absorption Rate, or SAR. The SAR limit for mobile devices is 2 W/kg averaged over 10
grams of tissue and include a substantial safety margin designed to assure the safety
of all persons, regardless of age and health.
Tests for SAR are conducted using standard operating positions with the device trans-
mitting at its highest certified power level in all tested frequency bands. The highest
SAR values under the ICNIRP guidelines for this device model are:
English
61