Table of Contents
Advertisement
4. Configuring Distributed Components
10. When you add devices to OpenLane's database, specify the new location of
4-8
5. Stop OpenLane:
OLControl stop
If OpenLane does not shut down within two minutes, proceed with the next
step regardlessly.
6. Reboot the server.
7. Mount the directory:
mount -F nfs -o rw
172.20.1.10:/opt/pdn/OpenLane/uhpoller/poller_poller1
/opt/pdn/OpenLane/uhpoller/poller_poller1
This is a temporary mount and will not be reestablished after a reboot. To set
up a permanent mount, add the following line to the /etc/vfstab file:
172.20.1.10:/opt/pdn/OpenLane/uhpoller/poller_poller1 -
/opt/pdn/OpenLane/uhpoller/poller_poller1 nfs - yes rw,bg
8. Verify the mount:
mount
9. Start OpenLane:
cd /opt/pdn/OpenLane
OLControl start
the poller/reader. Modify existing devices to use the new poller/reader (poller1
in this example):
January 2002
7800-A2-GB32-00
Advertisement
Table of Contents
