Radio - Pioneer DEH-X8700DAB Operation Manual

To receive stored service components
1
Select a preset channel from [PCH LIST] (page 6), then press the M.C. dial.
Pause/Time shift functions
The unit stores recent broadcasts in the memory automatically. The memory capacity of
this unit varies depending on the bit rate of the service component used. The
approximate memory capacity is five minutes for 192 kbps.
To pause/resume
1
While receiving the service component, press the M.C. dial to display the main
menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [Pause], then press to confirm.
4
Turn the M.C. dial to select [ON], then press to confirm.
To resume the service component, select [OFF], then press to confirm.
To use the time shift function
1
While receiving the service component, press and hold
2
Turn LEVER to the left (skip back one minute) or to the right (skip forward one
minute) to adjust the playback point.

Radio

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the
Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS
(radio data system) function only works in areas that broadcast RDS signals for FM
stations.
Receiving preset stations
1
Press SRC/OFF to select [Radio].
2
Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].
3
Press and turn the M.C. dial to select a preset channel.
TIP
The LEVER can also be used to select a preset station when [Tuning Mode] is set to [Preset] in
FUNCTION settings (page 14).
Best stations memory (BSM)
The six strongest stations are stored on the preset channels.
1
After selecting the band, press the M.C. dial to display the main menu.
2
Turn the M.C. dial to select [FUNCTION], then press to confirm.
3
Turn the M.C. dial to select [BSM], then press to confirm.
To seek a station manually
1
After selecting the band, Turn LEVER to select a station.
Turn and hold LEVER then release to seek an available station. Scanning stops when
the unit receives a station. To cancel seek tuning, turn LEVER.
NOTE
[Tuning Mode] needs to be set to [Manual] in the FUNCTION settings (page 14).
To store stations manually
/DISP.
1
While receiving the station you want to store, press
select a preset channel.
2
Press and hold the M.C. dial.
Using PTY functions
The unit searches for a station with PTY (program type) information.
1
Press the M.C. dial during FM reception.
2
Turn the M.C. dial to select [PTY search], then press to confirm.
3
Turn the M.C. dial to select a program type from [News&Inf], [Popular], [Classics]
or [Others].
4
Press the M.C. dial.
The unit begins to search for a station. When it is found, its program service name is
displayed.
NOTES
• To cancel the search, press the M.C. dial.
and turn the M.C. dial to
7
En