Management And Communication Options Menu; Telnet Session Options - Paradyne HOTWIREt 7984 User Manual

Management and Communication Options Menu

Telnet Session Options

Î
7984-A2-GB20-10
The Management and Communication Options Menu includes the following:
Telnet Session Options, Table A-5
Communication Protocol
General SNMP Management
SNMP NMS Security
SNMP Traps Options, Table A-9
The Telnet session configuration options control whether a Telnet session is
allowed through an interconnected IP Network. If allowed, these options
determine what level of security to apply to the session to control access. Only
one Telnet session is allowed at a time. Initial values are determined by the
configuration you currently have loaded. To access the Telnet Session Options
screen, follow this menu selection sequence:
Main Menu Configuration
Management and Communication
main/config/telnet
Telnet Session:
Telnet Login Required:
Session Access Level:
Inactivity Timeout:
Disconnect Time (Minutes)
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu
Save
February 1999
Options, Table A-6
Options, Table A-7
Options, Table A-8
Load Configuration From
Telnet Session
TELNET SESSION OPTIONS
Configuration Option Tables
Hotwire
Model: 7984
Enable
Enable
Administrator
Enable
5
Î Î
MainMenu Exit
A-11