Paradyne HOTWIREt 7984 User Manual page 119

Index
A
Abort All Tests, 5-1
ac transformer, connecting, 3-2
access
SNMP, 7-4
to asynchronous terminal interface, 2-3
access level
effective, 7-1
functions available for, 7-1
access to user interface, resetting/restoring, 7-5
administer login, 7-2
AIS (Alarm Indication Signal)
Send AIS on Network Failure, A-5
status message, 4-3
Alarm, LED, 4-13
ASCII, printable characters, 3-4
ATI (Asynchronous Terminal Interface)
access, 2-1
defined, 1-1
exiting, 2-9
initiating session, 2-2
virtual function keys, 2-7
authentificationFailure, B-1
AutoRate
Network Interface Options screen, A-2
switch setting, 3-10
C
cables, C-1
COM Port Interface Cable, C-4
COM Port-to-PC cable, C-4
DC Power cable, C-6
DSL Network Interface Cable, C-3
figures, C-1
Optional Power Cable, C-6
part numbers, D-1
pin Assignments, C-1
Card Failed
self-test result, 4-5
status message, 4-4
Circuit Identifier, A-3
Clock Failed, status message, 4-4
7984-A2-GB20-10
COM port
asynchronous terminal settings, 3-3
Communication Port Options, A-8
inactivity timeout, A-10
interface cable, C-4
resetting, 7-5
Communication Protocol Options, A-13
Community Name , A-16, A-17
community names, for SNMP, 7-4
configuration
accessing options, 3-11
choosing an interface mode, 3-6
Communication Port Options, A-8
Communication Protocol Options, A-13
DSX-1 Interface Options, A-4
editing and displaying, 3-12
General SNMP Management Options, A-16
loader (TFTP), 3-13
Management and Communication Options, A-11
menu, 3-11
network example, 1-3
option tables, A-1
overview, 3-1
reset factory defaults, 7-5
saving changes, 3-15
SNMP NMS Security Options, A-18
switchpacks, 3-7
System Options, A-6
Telnet Session Options, A-11
connecting
an asynchronous terminal, 3-3
to the network, 3-3
connectors
COM Port, C-5
Location, 1-4
power input, C-6
rear panel, C-1
CPU Fail, self-test result, 4-5
create login ID, 7-2
customer configuration, 3-6
February 1999
IN-1