Paradyne HOTWIREt 7984 User Manual page 75

7984-A2-GB20-10
3. Create the login by entering the following fields. Login IDs and passwords are
case-sensitive.
On the Login Entry
screen, for the . . .
Login ID
Password
Re-enter Password
Access Level
NOTE:
Assign at least one Administrator-level Login ID. Full access is necessary
to make configuration option changes and administer logins.
4. Press Ctrl-a to switch to the screen function key area below the dotted line.
Select Save and press Enter.
5. When Save is complete, Command Complete appears at the bottom of the
screen.
6. If additional logins are required, repeat
7. When all logins are entered, press Esc to return to the Administer Logins
screen.
8. Select Save and press Enter.
February 1999
Enter . . .
1 to 10 ASCII printable characters (hex21 through 7E).
Blanks are not allowed.
1 to 10 ASCII printable characters that can consist of
0–9, a–z, A–Z, # (pound), . (period), – (dash), and
/ (slash).
1 to 10 ASCII printable characters characters that can
consist of 0–9, a–z, A–Z, # (pound), . (period),
– (dash), and / (slash).
Administrator, Operator
Steps 2 through
Security
5.
7-3