Advertisement
Quick Links
Hotwire 5038 Distributed POTS Splitter
Customer Premises
Installation Instructions
Document Number 5038-A2-GN10-00
February 1998
Before You Begin
The 5038 Distributed POTS (Plain Old
Telephone Service) Splitter works in
conjunction with a Remote Termination
Unit (RTU). Verify that the local loop is
connected to the POTS/DSL network.
For RADSL (Rate Adaptive Digital Subscriber
Line) RTU installation information, refer to the
appropriate RTU document:
Document Number
5216-A2-GN10
5246-A2-GN10
5446-A2-GN10
5620-A2-GN10
Contact your sales or service representative to order additional product documentation.
Paradyne documents are also available on the World Wide Web at:
http://www.paradyne.com
Select Service & Support
Package Checklist
Verify that your package contains the following:
Model 5038 Distributed POTS Splitter
Local loop interface cable
TM
Document Title
Hotwire 5216 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
Hotwire 5246 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
Hotwire 5446 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
Hotwire 5620 Remote Termination Unit (RTU)
Customer Premises Installation Instructions
Technical Manuals
1
Distributed
POTS Splitter
98-15838
Advertisement
Related Manuals for Paradyne Hotwire 5038-A1-00
Summary of Contents for Paradyne Hotwire 5038-A1-00
-
Page 1: Installation Instructions
5620-A2-GN10 Hotwire 5620 Remote Termination Unit (RTU) Customer Premises Installation Instructions Contact your sales or service representative to order additional product documentation. Paradyne documents are also available on the World Wide Web at: http://www.paradyne.com Select Service & Support Technical Manuals... - Page 2 What Does the 5038 Distributed POTS Splitter Do? The 5038 Distributed POTS Splitter and Hotwire Remote Termination Unit (RTU) are components in the RADSL Access System. This system provides high-speed Internet or corporate LAN access over traditional twisted-pair copper telephone wiring. The POTS splitter blocks out the DSL signal and allows the POTS frequencies to pass through.
- Page 3 Installing the POTS Splitter Without an RTU Each POTS splitter connected to a phone without an RTU uses two cables with RJ11 connectors. The two cables are installed: From the Local Loop to the POTS splitter (supplied cable) From the POTS splitter to the telephone (existing cable) Customer Premises (CP) POTS...
- Page 4 Installing the POTS Splitter With an RTU The POTS splitter connected to the RTU uses three cables with RJ11 connectors. The three cables are installed: From the Local Loop to the POTS splitter (supplied cable) From the POTS splitter to the telephone (existing cable) From the POTS splitter to the RADSL RTU (cable supplied with the RTU) Procedure To connect a POTS splitter to a phone and an RTU:...
- Page 5 Optional Alternative Placement The POTS splitter is designed for tabletop placement. The POTS splitter can also be mounted on a wall. To mount a POTS splitter on the wall, you will need: Two #6 self-threading screws with molly bolts for each housing Drill and 3/16 drill bit for the molly bolt Screwdriver Procedure...
- Page 6 5038 Distributed POTS Splitter Technical Specifications Item Specification Height x Width x Depth 1.24 x 1.87 x 4.78 (3.14 cm x 4.75 cm x 12.13 cm) Weight 3.4 ounces (96.4 grams) Approvals FCC Part 68 Refer to the equipment’s label for Registration Number. Safety Certifications Refer to the equipment’s label for approvals on product.
-
Page 7: Important Safety Instructions
Important Safety Instructions 1. Read and follow all warning notices and instructions marked on the product or included in the manual. 2. This product is intended to be connected to Listed/Certified telephone wiring with a minimum of 24 AWG (.5 mm) behind a Listed/Certified primary protector. 3. - Page 8 Paradyne worldwide office locations, use one of the following methods: Via the Internet: Visit the Paradyne World Wide Web site at: http://www.paradyne.com Via Telephone: Call our automated call system to receive current information via fax or to speak with a company representative.