Table of Contents
Advertisement
Choosing the Installation Location
Where airflow is not blocked
Where cool air can be distributed throughout the room
Install the refrigerant piping length and the height
difference of both indoor and outdoor units as
indicated in the installation diagram
Wall that prevents vibration and is strong enough to hold the product weight
Out of the direct sunlight
1m or more away from the TV or radio
(to prevent the screen from being distorted or noise from being generated)
As far away as possible from fluorescent and incandescent lights (so that the remote
control can be operated well)
A place where the air filter can be replaced easily
Avoid the following places to prevent malfunction of the unit
- Where there is machine oil
- Where sulfide gas exists
Observe the clearances and maximum lengths as seen in the picture below when installing the air conditioner.
Wrap the refrigerant pipes and the drain
hose with the absorbent pad and vinyl
tape. Refer to page 21 for further details.
The appearance of the unit may be different from the diagram depending on the model.
AVXWN@@_IM_E_31755_5.08.10.indd 5
- Salty environment such as the seaside areas
- Other special atmosphere areas
300 mm or more
125 mm
or more
You can select the direction
of draining. (left or right)
125 mm
or more
5
E-
2010-5-8 10:34:16
Advertisement
Table of Contents
