Advertisement
Quick Links
OVERHEAD CONSOLE for use with FLIPDOWN VIDEO SYSTEM
These instructions are intended for use only by experienced professionals in the automotive customizing
business. Special tools and equipment, as well as specialized handling and care of product during installation,
may be required. Before beginning this installation, carefully read through the following instructions. Use
extreme care when cutting headliner material. Check for wiring or other components above headliner
material. Cut only where indicated.
Materials/ Tools required for this installation:
1. #2 Phillips screwdriver
3. Razor Knife or Similar
5. 18 GA wire 9'
7. Masking Tape
INSTALLATION INSTRUCTIONS
1187025 & 27PL
2000+ SUBURBAN W/ SUNROOF
NOTE: Requires Additional Insert
2. Powered screwdriver or drill with adapter
4. Digital Voltmeter
6. Measuring Tape
8. Audiovox Video Module & Plastic Insert
FOR
Advertisement
Related Manuals for Audiovox 1187025
Summary of Contents for Audiovox 1187025
-
Page 1: Installation Instructions
3. Razor Knife or Similar 5. 18 GA wire 9' 7. Masking Tape INSTALLATION INSTRUCTIONS 1187025 & 27PL NOTE: Requires Additional Insert 2. Powered screwdriver or drill with adapter 4. Digital Voltmeter 6. Measuring Tape 8. Audiovox Video Module & Plastic Insert... - Page 2 MATERIALS PROVIDED FOR INSTALLATION: ITEM Description SCREW, #10 X 7/8” MACHINE SCREW SCREW, #10 3/8” SCREW WASHER, #10 SCREW, # 8 X 1” SHEET METAL SCREW WASHER, # 8 CONSOLE MAIN BRACKET TEMPLATE INSTALLATION INSTRUCTION Sept. 18, 2002 Printed in the U.S.A...
- Page 3 2. Loosen headliner around the sunroof opening by pulling the gasket of the headliner out of the channel along the rear edge of the sunroof. Insert the mounting bracket (item 7 pg 2), positioning the rear tabs over the sunroof motor toward the rear of the vehicle.
- Page 4 6. Install and route all video and audio cables, and any other added component requirements to their respective places in the vehicle. Refer to component installation instructions for wiring diagrams. The suggested routing of the video system cable is as follows: Above the headliner from video system to the B -pillar.
Need help?
Do you have a question about the 1187025 and is the answer not in the manual?
Questions and answers