Table of Contents
Advertisement
2-6
Cable Thru Considerations
If another work station is to be connected to the printer you have just set up,
do the following:
1.
Connect the cable that leads to the next work
station into the upper cable socket.
2.
Set the Terminator switch to 2. If your printer
attaches to a 5251 Display Station Model 2 or 12, a
System/34, or a System/3S, setup is complete. If
your printer does not attach to a 5251 Display Station
Model 2 or 12, a System/34, or a System/3S, go to
your system setup procedure manual for completing
the printer setup.
(l---+---
Upper Cable Socket
~Terminator
Switch
~,
Advertisement
Table of Contents
