Cable Thru Feature - IBM 5256 User And Setup Manual

CABLE THRU FEATURE
If your printer has the switches shown in the following illustration and is to be
connected at this time to another work station (5252 Dual Display Station,
5251 Display Station Model 1 or 11, or 5256 Printer), proceed to Cable Thru
Considerations.
If your printer does not have the indicated switches or if your printer does have
the indicated switches but another work station will not be connected to it,
make sure that the Terminator switch on your printer is set to 1. If your printer
attaches to a 5251 Display Station Model 2 or 12, a System/34, or a
System/38, setup is complete. If your printer does not attach to a 5251
Display Station Model 2 or 12, a System/34, or a System/38, go to the
system setup procedure manual for completing the printer setup.
Address Switches
2
~
Terminator Switch
.Connecting the Cable(s) to the Printer 2-5