Overview - Siemens INOX PRO SIMATIC IPC277D Service Manual

Overview

The INOX PRO devices are equipped with operator controls on the front and are intended for
"stand mounting" or "support arm mounting".
①
Illuminated pushbutton "left" with green LED
②
Illuminated pushbutton "right" with red LED
③
EMERGENCY OFF button
④
Mounting kit for stand mounting
This document describes the following maintenance work:
● Replacing the seal of the compartment cover
● Replacing defective operator controls in the device front and LEDs
● Replacing the seal of the rear panel
● Changing the mounting type, which means converting a device for stand mounting into a
device for support arm mounting and vice versa.
SIMATIC IPC277D 19" INOX PRO, SIMATIC IFP1900 INOX PRO
Service Manual, 03/2015, A5E35751762-AA
⑤
Terminal compartment cover with seal
⑥
Rear panel with seal
⑦
Mounting kit for support arm mounting
1
5