Paradyne Hotwire 5446 Installation Instructions Manual page 9

2. Use an 8-pin Ethernet cable for the Ethernet connection. Insert one end of the
cable into the jack labeled ETHERNET.
Use a straight-through cable and connect the other end to an Ethernet hub, or
Ethernet
Hub
Use an Ethernet crossover cable and connect the other end to a PC with an
Ethernet Network Interface Card (NIC) or router.
PC with Ethernet
Network Interface
Card
For RTU cable pin assignments, refer to Cables & Connectors , page 17.
Hotwire RTU
Ethernet
Cable
Hotwire RTU
Ethernet
Line
Ethernet
Ethernet
Cable
9
97-15303-01
Line
97-15303b