Paradyne Hotwire 5446 Installation Instructions Manual page 11

Optional RTU Wall Placement
The Hotwire 5446 RTU is designed for tabletop placement. The RTU can also be
mounted on a wall. To mount an RTU, you will need:
Three slotted-head #6 self-threading screws with molly bolts
Drill and 3/16" drill bit for the molly bolts
Screwdriver
A template with the dimensions for the three screws is provided. See RTU Hardware
Template on page 12.
Procedure
To mount the RTU:
1. Use a drill to install the plastic anchors (molly bolts).
2. Use a screwdriver to install the screws. Do not install the screws flush with the wall.
Leave enough clearance to hang the RTU housing from the screws.
Hotwire
RTU
98-16170
11
Wall
Fasteners